Download Redsn0w 0.9.6RC9 (Guide)

Few minutes ago Dev-Team has released iOS 4.3.1 untethered jailbreak for both Redsn0w 0.9.6rc9 and PwnageTool 4.3, the jailbreak support all iOS devices except iPad 2.

NOTE: Users who rely on ultrasn0w unlock MUST stay away from Redsn0w.

Step 1: Download iOS 4.3.1 for your device (download links at the end)
Step 2: Update/Restore to iOS 4.3.1 firmware using the IPSW file via iTunes 10.2.1.
Step 3: Start Redsn0w and point it to the official iOS 4.3.1 firmware file.

Step 4: Now simply select “Install Cydia” and click “Next”. 

Step 5: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.

 

At this stage you will be presented with a screen where you will be guided on how to enter DFU mode. Quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.

 

Step 6: Wait shortly. Once done, your iPhone, iPad or iPod touch will restart automatically and you will find it fully jailbroken (untethered) on the latest iOS 4.3.1 firmware.

Download Redsn0w 0.9.6rc9 (Windows)
Download Redsn0w 0.9.6rc9 (Mac)
Download iOS 4.3.1 for iPhone, iPad and iPod touch
Download iTunes 10.2.1 for Windows / Mac OS X

Fix iPhone 4 iOS 4.3 Battery Drainage / Short Life Time [How to]

As mos of you know the problem which faced some problems with battery life after upgrading to iOS 4.3, our reader has sent a new method to stop the battery drain.

First method to stop iOS 4.3 Battery life problem:

Battery life should be restored to what they were before the latest update. Precisely, it's the notification system in Ping.

Go to Settings > General > Restrictions and select Enable Restrictions. You will see Ping setting whereby you can click on the switch to disable it. This will save 2 hours for your iOS device


Second method to stop iOS 4.3 Battery life problem (use if the first method didn't solve your problem):
Go to Setting > General > Reset > Reset Network Settings.

Redsn0w 0.9.7 Untethered Jailbreak for iOS 4.2.1 Released ! Here’s How To Do It Step By Step

As promised, the iPhone Dev Team has released the necessary jailbreak tools which can untether the latest iOS 4.2.1 jailbreak on iPhone 4, iPod touch 4G, and iPad. Old-generation iOS devices already have untethered jailbreak on iOS 4.2.1.

For those who don't know, Apple has already patched the untethered patch in iOS 4.2.1 update so it becomes tethered jailbreak on new-generation devices mentioned above. Being tethered jailbroken means that once your iPhone is successfully jailbroken, you'll need to connect your iPhone to your computer if you ever need to reboot your iPhone or your iPhone loses battery charge. The updates Redsn0w 0.9.7b1 brings untethered jailbreak for those devices on iOS 4.2.1.
Below is the full step-by-step guide to jailbreak your iOS device using Redsn0w 0.9.7b1 and get untethered jailbreak immediately. 

STEP 1: First of all, you have to jailbreak your iOS 4.2.1 device using Redsn0w by following the step by step instructions posted here.

STEP 2: Once jailbroken, tap on Cydia and check if your 4.2b3 SHSH blobs saved or not. You should see "SHSH: 4.2b3" in the status as shown in the screenshot below:

STEP 3: Now download Redsn0w 0.9.7b1 from the links given below and connect your iPhone, iPod touch or iPad.

STEP 4: Since this is a beta release, you must have usbmuxd that can be download from here. Now start terminal in python-client directory then type in the following commands:

chmod +x tcprelay.py

./tcprelay.py -t 22:2222

STEP 5: Now start Redsn0w 0.9.7b1 and point it to the official iOS 4.2.1 .IPSW file.

STEP 6: In the next page, check on Jailbreak Monte which untethers your iOS 4.2.1 jailbreak then point it to iOS 4.2 beta 3 firmware (Google it if you don't have a developer account).

STEP 7: Final step is to put your iOS device in DFU Mode using Redsn0w instructions on the screen.

Finally, sit back and let Redsn0w go in bunch of steps and you'll finally get untethered jailbreak on your new-generation iOS device.

Please note that this is a beta release, and upcoming versions will bring support for Windows users and will have built-in usbmuxd for easy process.

Download Redsn0w 0.9.7b1 for Mac OS X
Download iOS 4.2.1 for iPhone, iPad and iPod touch
Download iTunes 10.1.1 for Windows / Mac OS X
Thanks: coveringweb.com

Update iPhone 4 to iOS 4.2.1 While Preserving Baseband [How to Guide]

Most of iPhone 4 users didn't update to iOS 4.2.1 as it updates baseband and make it not unlockable. So in case you got an iPhone 4 on older 01.59.00 baseband, we have been tipped off about a solution for that. The below steps will guide you to update iPhone 4 to iOS 4.2.1 while preserving the same older baseband 01.59.00 and unlock it.
STEP 1: Right click on Notepad from Start - Programs - Accessories, then choose Run as administrator from the contextual popup menu.

STEP 2: Once notepad opens, select Open from the File menu then navigate to C:\Windows\System32\drivers\etc\ and open the hosts file as shown:

STEP 3: Now add 74.208.10.249 gs.apple.com to end of the file as shown in the screenshot below:

STEP 4: Now, you'll have to restore your iPhone 4 to iOS 4.2.1 by clicking on the iPhone icon on the left sidebar of iTunes then hold left “alt” button (“Shift” button on Windows) on the keyboard and click on “Restore” then release the alt button, Now Select the original iOS 4.2.1 firmware found here.

STEP 5: iTunes should pop-up with some error as error 1013, 1015 or some other error. This indicates that you have done it successfully, hit OK to continue.

STEP 6: Now you iPhone will stuck in Recovery Mode showing the well-known "Connect to iTunes" message. You have to run TinyUmbrella (Windows - Mac) or RecBoot 2.1 for Mac OS Xto get out of recovery mode.

You'll now be able to jailbreak your iPhone 4 using Redsn0w 0.9.6 for tethered and Redsn0w 0.9.7 for untethered one then unlock it using Ultrasn0w carrier unlock. [Thanks @AppleBullet for hat tip, via @Ven000m]

Restore iPhone 3GS, 3G to iOS 4.2.1 / 4.1 on 06.15.00 Baseband After Using Ultrasn0w 1.2 [How to Guide]

In case you have unlocked your iPhone 3GS / 3G by flashing iPad baseband 6.15.00 with ultrasn0w 1.2 on iOS 4.2.1, and have issues while restoring your device, here is Sherif Hashim the guy behind ultrasn0w unlock tool, has posted a simple guide showing how to restore your iPhone 3GS / 3G to avoid iTunes errors.

Note: To restore your iPhone 3GS from 4.2.1 to 4.1, you must have saved SHSH blobs for iOS 4.1.

For PwnageTool users:

A :  If you are on Mac and use PwnageTool: If you used pwnage tool then you will have to create a “new” custom 4.1 or 4.2.1 and say “No” when you are offered the BB update to 6.15.00 since you already have it, then build the custom ipsw and restore to that.

For Redsn0w users:

B : If you use(d) Redsn0w:

B.1: If you are currently on 4.1, then you can restore to official 4.1 again, and when you see error 1015 pop-up, you kick your device out of recovery mode using TinyUmbrella, use redsn0w and don’t check “ipad BB update” because you already have that Here Is How To Restore iPhone 3G And iPhone 3GS While On Baseband 06.15.00 And Having Issues icon smile

B.2: If you are currently on 4.2.1 then you’ll have to restore back to 4.1 (because 4.2.1 will not allow you to kick the phone out of recovery when 1015 occurs due to the silly BB / iOS mismatch check added there) , then do the same steps as CASE-1.

How to go again to iOS 4.2.1:

If you want to go again to 4.2.1 your only way is to use a custom 4.2.1 done by pwnage tool in the same steps mentioned in A .

Try Hashim's methods above to restore you device between 4.2.1 and 4.1, it worth trying. Don't forget to tell us about your experience.

Play Flash Videos on Your iOS Device with iOSFlashVideo [How to Guide]

Have you ever wanted to watch a video on your iOS device, but you needed flash? Now you can watch videos on your device using iOSFlashVideo! Neither jailbreak or payments required for this method! Just follow the steps below and you can play your flash videos on your iOS device easily.

NOTE: You may expierence problems watching embedded videos (like Megavideo, Vimeo, or DailyMotion videos on blogs or other sites, etc.). To resolve this issue, just open up the bookmarks bar and launch iOSFlashVideo.

How to get iOSFlashVideo and use it:
STEP 1: On your iOS device, launch Safari and type in http://iosflashvideo.fw.hu address as shown:

STEP 2: Add a bookmark by pressing the + button on the bottom of the Safari web browser then touch on the Add Bookmark button.

STEP 3: Press the Save button on the top right hand corner.

STEP 4: Next, tap on the bookmarks icon at the bottom of the Safari web browser then tap on edit at the bottom left and select iOSFlashVideo.

STEP 5: After you have selected the iOSFlashVideo bookmark, delete everything before the word javascript. Even though the picture below didn't delete the # symbol in front of javascript, please do so. Save it and exit out of the bookmarks on Safari.

STEP 6: Go to any supported video website on the list above and then press the iOSFlashVideo bookmark in thebookmarks section in Safari so you can view and watch flash videos.

We'll be happy to answer your questions by commenting below. Also don't forget to tell if it does work with you and how much you like it!

HOW TO: Activate iPhone 4, 3GS, 3G Without Original SIM or Hacktivation with SAM & Redsn0w 0.9.6b6

Few minutes ago, a new mix-up between iPhone dev-team and sbingner, has been done to allow you to activate your iPhone 4, 3GS and 3G without using original SIM or Hactivation. Thanks to sbingner's new tool which called SAM (Subscriber Artificial Module) and redsn0w 0.9.6b6. Moreover this mix-up has fixed the battery consuming after unlocking iPhone 3GS/3G with ultrasn0w 1.2. Let's check out how use this package after the jump.

STEP 1: Download Redsn0w 0.9.6b6 for Windows and Mac, (Links at the end)

STEP 2: For iPhone 3GS/3G users follow our previous guide posted here, for other devices follow this guide, (But be sure you are using Redsn0w 0.9.6b6)

STEP 3: After you finish jailbreaking your device, start Cydia and add http://repo.bingner.com repository.

STEP 4: Then install “SAM” and “SAMPrefs”.

STEP 5: Launch Redsn0w 0.9.6b6 again, and select “Deactivate” option.

STEP 6: Navigate to Settings > SAM and click "De-Activate iPhone"

STEP 7: Connect your iPhone to your PC then launch iTunes, allow iTunes to activate your iPhone officially. You will see this message "iPhone is activated"

According to sbingner : If iTunes says invalid SIM, you will need to manually select the appropriate carrier under one of the methods besides "Automatic" and click on a SIMID.

STEP 8: Here's the final step, go now and follow our guide posted here to unlock your device with ultrasn0w 1.2

Download Redsn0w 0.9.6b6 for Windows and Mac.

HOW TO: Update / Unlock iPhone 3GS / 3G Baseband 06.15.00 with Redsn0w 0.9.6b5 on iOS 4.2.1 / 4.1 [Windows & Mac]

Well, here's the iPhone Dev-Team has just released redsn0w 0.9.6b5 to jailbreak iPhone 3GS and 3G on iOS 4.2.1 and update baseband to 06.15.00 which can be unlocked with the newly released ultrasn0w 1.2, the redsn0w 0.9.6b5 is available for both windows and mac users.

The new redsn0w 0.9.6beta5 is out. It gives both Windows and OSX users the ability to flash the iPad 06.15 baseband on iPhone3G or iPhone3GS. It fetches the baseband files directly from Apple for now (the only IPSW you ever point it at is the stock IPSW for the FW on your iPhone right now). There may be a long delay while it’s doing this (their servers are currently getting pounded).

WARNING — YOU DO THIS AT YOUR OWN RISK!  PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.

1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple. You’ll be voiding your warranty in a very obvious way.
2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail).  You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).

For whom is this Guide:
This version of redsn0w 0.9.6b5 is developed ONLY for iPhone 3GS and 3G users who rely on unlock. Precisely,  This guide showing how to jailbreak and update baseband to 06.15.00 for ONLY iPhone 3GS and 3G who have unlocked devices.

Unsupported devices, what have to do:
iPhone 4 and 3GS users who don't rely on unlock, you can follow the same guide but with redsn0w 0.9.6b4 to jailbreak their devices on iOS 4.2.1, see guide Posted Here.

Here's the step by step guide:

STEP 1: Download redsn0w 0.9.6b5,  iOS 4.2.1 for your device(download links at the end).

STEP 2: Update to 4.2.1 firmware using the IPSW file you just downloaded via iTunes 10.1.

STEP 3: Launch Redsn0w 0.9.6b5,  and browse for iOS 4.2.1 firmware final version.

STEP 4: Now you have to select "Install Cydia" and "Install iPad baseband", and then click "Next" (in this step redsn0w will update your baseband to 06.15.00 which works with ultrasn0w 1.2)

STEP 5: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.

STEP 6: At this stage you will need to put your iPhone in DFU mode by holding “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.

 

STEP 7: You will Get a Jailbroken Device on the latest iOS 4.2.1  and the unlockable baseband 06.15.00

STEP 8: This step is only for these devices iPhone 4, 3GS (New Bootrom), iPod touch 4G,  3G, 2G, iPad. While this is tethered jailbreak and whenever you want to do anything related to jailbreak like SSH your device, or running Cydia, you must first run your device in the so called “jailbroken state” on every reboot by using “Just boot tethered right now” option.

How to unlock iPhone 3GS / 3G on iOS 4.2.1 / 4.1 using ultrasn0w 1.2 :
This is the final step to get your device unlocked on iOS 4.2.1 / 4.1 with the newly release ultrasn0w 1.2, follow our full step by step guide Posted Here.

Download iOS 4.2.1 for iPhone, iPod touch and iPad
Download Redsn0w 0.9.6b5 for Windows
Download Redsn0w 0.9.6b5 for Mac
Download iTunes 10.1 for Windows or Mac

HOW TO: Update iPhone 3GS / 3G Baseband to 06.15.00 and Unlock it

Just a couple of hours back, the iPhone Dev Team has updated their carrier unlock tool which brings unlock for iPhone 3GS & 3G on iOS 4.1 or iOS 4.2.1 but unfortunately, you have to update your device's baseband to 06.15.00 to be able to unlock it.


Simply follow the steps below to jailbreak and unlock your iPhone 3G on iOS 4.2.1 using PwnageTool 4.1.3 for Mac OS X.

STEP 1: Download PwnageTool 4.1.3 unlock edition from here.

STEP 2: Download iOS 4.2.1 for your device and also catch iOS 3.2.2 from here before it's removed (required to update the baseband). Then copy all the files to your desktop.

STEP 3: Now launch PwnageTool and select iPhone 3GS / 3G and point it to the original iOS 4.2.1 firmware you downloaded.

STEP 4: You'll now be asked if you want to update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Click on YES and then select Browse for IPSW and point it to iOS 3.2.2 you downloaded.

STEP 5: You'll have to choose some options as installing Cydia packages, custom logos and packages. Finally, hit the blue the build button.

STEP 6: You'll be asked to save the cooked firmware. Please allow up to 10 minutes.

STEP 7: When prompted if your iPhone has been Pwned before, we clicked No. It allows for a more thorough restore. Once done, follow the instructions seen on the screen to enter into DFU mode

STEP 8: Now, You will have to restore your iPhone to the jailbroken custom firmware by Clicking on the iPhone icon on the left sidebar of iTunes then hold left “alt” button (“Shift” button on Windows) on the keyboard and then click on “Restore” then release the alt button, Now Select the custom firmware created by PwnageTool and Let iTunes go in a bunch of steps.

STEP 9: Almost done, you can now unlock your iPhone 3GS / 3G by following my previous guide posted here.

Ultrasn0w 1.2 Unlocks iPhone 3GS, 3G on iOS 4.2.1 [How to Guide]

The iPhone Dev Team has just released ultrasn0w 1.2 which brings carrier unlock for iPhone 3GS and iPhone 3G on iOS 4.2.1 or iOS 4.1.

From the iPhone Dev Team Blog:

Today we’re pleased to announce our free carrier unlock for iPhone3G/3GS owners with a baseband later than 05.13.04.  The unlock for that baseband exploited the AT+XAPP command, thanks to a crash initially discovered by @sherif_hashim (@Oranav also found this crash).  So what hole are we exploiting today, since Apple closed that AT+XAPP hole?  Well, we’re exploiting the exact same hole!

It turns out that the very first iPad firmware 3.2.2 has baseband version 06.15.00 still vulnerable to AT+XAPP.  The iPad baseband is built for the exact same baseband chip as the iPhone3G/3GS — they’re fully compatible!  Some of us have been running 06.15 for weeks now on our iPhones in preparation for this release.

Since 06.15 is a higher version than 05.14 or 05.15 (where AT+XAPP is gone), anyone stuck at those versions can simply upgrade to 06.15 to unlock again!  Luckily for us, Apple *still* provides the iPad FW 3.2.2 with this vulnerable baseband right from their own servers. (Grab it now, before they take it down!)
We’ve been busy updating both PwnageTool and redsn0w to make the baseband update as seamless as possible.

1. First up is “PwnageTool 4.1.3 Unlock Edition”.  It has a special dialog box which will ask you if you want to update to the iPad baseband.  You must already have the iPad 3.2.2 IPSW on your computer (see the above link)….so just point PwnageTool at it (or let it find it on its own if you’re in “simple” mode).
2. Directly after PwnageTool 4.1.3 is available, the official ultrasn0w repo http://repo666.ultrasn0w.com will be updated with ultrasn0w 1.2, which covers iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04 and now 06.15.00.
3. Finally, we’ll release an update to redsn0w today for those without Macs and can’t run PwnageTool.  The new redsn0w will give you the option to update your baseband to 06.15 too.

WARNING — YOU DO THIS AT YOUR OWN RISK!  PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.

1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple.  You’ll be voiding your warranty in a very obvious way.
2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail).  You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).

Certainly don’t update to 06.15 if you don’t need to!  Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.

This PwnageTool also contains a 4.2.1 bundle for iPhone3G owners…for all else, it’s still only 4.1.  If you have an iPhone3GS with an old bootrom, the new redsn0w will handle 4.2.1 for you (in fact it covers 4.2.1 for all devices, even though some of them are still tethered at 4.2.1 until @comex can work some untethering magic).  iPhone3GS users with old bootroms who want to go to 4.2.1 should not use this PwnageTool!  Update to stock 4.2.1 first, then use the upcoming redsn0w to update your baseband.

Please feel free to use our comments section for questions.  We have some very knowledgeable and helpful moderators:  angiepangie, Confucious, dhlizard, and Frank55!

Official Bittorrent Releases

PwnageTool 4.1.3  – PwnageTool_4.1.3_Unlock_Edition.dmg.5994102.TPB.torrent
SHA1 Sum = adda6d882dce1b5117d01586037de289407e038a

Simply follow the instructions posted below to unlock your iPhone 3GS / 3G on iOS 4.2.1. / 4.1 on 05.15.04 and 05.14.02 basebands.

How to: Jailbreak iPhone 3GS / 3G on iOS 4.2.1:
STEP 1: Unlocking requires that your iPhone is jailbroken. Follow our updated guide posted here to use PwnageTool to update your baseband so you can unlock, or follow our guide posted here to use reds0w 0.9.6b5 (Windows & Mac OS X) to do the same as PwnageTool to update baseband to 06.15.00.

How to: Unlock iPhone 3GS / 3G on iOS 4.2.1:
STEP 2: Once you jailbreak yoour device, you can now unlock your iPhone on baseband 06.15.00 using Ultrasn0w 1.2 from Cydia. To do so, follow the steps below:

• Press to launch Cydia Installer from your SpringBoard.
• Press to select the Manage tab at the bottom of the screen.
• Press to select the Sources button

• Now touch on Edit and then on Add. You will be prompted to enter the URL of the source. Type http://repo666.ultrasn0w.com and touch on Add Source to add this repository. 

• Once the source has been added press the large Return to Cydia button then select the Done button at the top right of the screen.
• Now select repo666.ultrasn0w.com from the sources list and at last select ultrasn0w from the list of packages as shown below then install this application.

STEP 3: Almost done, now simply reboot your iPhone and you should have a fully unlocked iPhone 3GS on iOS 4.1 or iOS 4.2.1.

Unfortunately, iPhone 4 unlockers have to wait a bit longer before they can use their device on any carrier they like but at least they had promised to start working on that starting from tomorrow.

Convert Your Springboard Icons to Retina Display!

As you all know, Apple has introduced retina display with four times as many pixels on the same screen size in the iPhone 4. Many app developers have already converted their apps and icons to support retina display, but others might have never converted them at all. Now with the help of Cydia tweaks, you can do it yourself!

To be able to follow our steps, you need a jailbroken device, you can jailbreak your iOS 4.x device using the latest version of Redsn0w by following our guide posted here then simply follow the steps given below.

STEP 1: You will need those Cydia programs for free by tapping into Cydia from your Springboard and touch on Search then install the following apps: iRetiner, MobileTerminal, and Erica Utilities.

STEP 2: Once you install these three programs from Cydia, launch MobileTerminal on your springboard.

STEP 3: Type in the following commands in MobileTerminal:

su (then press enter)
alpine (press enter again)
iRetiner (enter once more)

For some compatibility issue, if the letters do not show up on the screen when you are typing your password, continue typing and just press enter.

STEP 4: Now, you should reach a screen that looks like this:

Select option one by typing in 1 and press enter again.

STEP 5: By now, let the apps process. Your screen on your iDevice should look something similar to this:

This shows that the apps are converting to retina display. Once you are done, on the bottom of the screen there should be two options telling you whether to respring or not. Type down y to respring. You are now finished!

In conclusion, the iRetiner does improve the icons a lot. I have tried it myself and I see a huge improvement, even on the blurry icons! This is a a neat trick, but when you get new apps, you need to repeat this process. Even though that is a pain, look on the bright side, your icons look so detailed!

HOW TO: Enable AirPrint on iPhone 3G and iPod touch 2G

As most of you know, AirPrint may be the most interesting feature in the newly released iOS 4.2.1 that allows you to print documents and files directly from your iPhone, iPad or iPod touch. But not all devices will be able to enjoy this function, so we will show you how to enable AirPrint on non-supported devices as iPhone 3G and iPod touch 2G.

STEP 1: Download Redsn0w 0.9.6b3 (Windows - Mac OS X).

STEP 2: Download iOS 4.2.1 original firmware from here.

STEP 3: Connect your device into your computer via USB and launch Redsn0w you download in step 1. Click on browse and point it to the original iOS 4.2.1 firmware of your device and wait while it's recognized.

STEP 4: Now you have to check on Enable Multitasking, other items are optional.

STEP 5: Put your iPhone into DFU mode by following the instructions on the screen:

• Hold down the Power button for 5 seconds.
• Without releasing the Power button, also hold Home buttons together for 10 seconds.
• Now release the Power button but keep holding the Home button for 15 seconds.

STEP 6: Once done, your iPhone will be rebooted and you'll get AirPrint on iPhone 3G ad iPod touch 2G.

From now on, when you open a page in Safari, you'll see the Print button by clicking on the share icon at the bottom. With this option, you can set how many copies of documents you want to copy. You have to select the printer (must be one of the 11 supported printers) and hit Print.

In case your printer is not supported by Apple, you can download and install Printopia to enable AirPrint on non-supported printers. [iPhoneItalia]